US
Canada
France
AustraliaRolyan Ezeform (Anti-Microbial) Thermoplastic Splinting Material
-
This product contains natural rubber latex which may cause allergic reactions.
-
For health reasons we are unable to accept returns or exchanges of hygiene products.
-
This item is considered dimensionally oversized parcel or requires truck delivery. Additional shipping charges will be calculated at time of order.
-
This item is classified as hazardous materials. Can ship ground only - restricted from air. Additional shipping surcharge will be added at time of order.
-
This product has a Bariatric rating.
-
If you have any questions please contact customer support at: 03448 730 035 or Email at:
customersupport@performancehealth.com
OTHER ADDRESSES
| Company or Name | Street | Address 2 | City | County | Postal Code |
|---|
- High resistance to stretch and moderate conformability
- Contains built-in, anti-microbial additive
- Non-coated surface bonds instantly without preparation
- Minimal memory; but can be reheated and reshaped
- Non-toxic, latex-free, and radiolucent
Key Material Benefits
Ezeform is the only Rolyan splinting material with a high resistance to stretch and moderate conformability. This gives the clinician maximum control while stretching out the material while also needing less force during formation, helping them produce large and intricate splints.
Handling
Resistance to stretch: Maximum
Material does not stretch unless pushed or pulled in a direction and then held until cool. Unexpected patient movement will not cause the material to deform, and it will not stretch or deform when removed from splint bath.
Conformability: Moderate
Conforms to surface contours and detail when some force is applied. Moderate degree of drape.
Memory: Minimum
While it can be reheated and reshaped, the material will not return to its original shape.
Bonding: Uncoated
Create a permanent bond by pinching together heated surfaces.
Physical
Colors: White
Thickness: Assorted
Available in the following sheet thicknesses: 1/8" (3.2 mm), 1/16" (1.6 mm) and 3/32" (2.4 mm).
Perforations : Assorted
Available in 1 percent, 19 percent or solid material.
Appearance: Opaque when heated
Hardened Splint
Rigidity: Moderate/Maximum (40.7 kpsi*)
Retains shape without reinforcement.
Surface: Smooth
No unwanted fingerprints or markings.
*Refers to Young’s Modulus testing value
Learn More about Rolyan Hand Therapy
| Brand | Rolyan |
|---|
- High resistance to stretch and moderate conformability
- Contains built-in, anti-microbial additive
- Non-coated surface bonds instantly without preparation
- Minimal memory; but can be reheated and reshaped
- Non-toxic, latex-free, and radiolucent
Rolyan Ezeform Anti-Microbial Thermoplastic Splinting Material
Overview
Ezeform™ features a high resistance to stretch and moderate conformability, which makes it stay in place while molding, giving the clinician more control. It will not stretch out of shape when removed from a splint bath, making it an excellent choice for medium and large splints. This version of Ezeform also includes an anti-microbial additive to slow the growth of bacteria, viruses, mold and mildew. It can be reheated and reshaped repeatedly, but once it has been stretched, it will not return to its original shape.
Rolyan Spectrum of Splinting Material
Rolyan provides therapists and clinicians the largest spectrum of hand therapy products and care. Rolyan empowers every therapist with the passion to mold and shape their patients’ recovery.
Heating Instructions
The recommended method for heating splinting materials is with hot water in a splint bath.
Only use a heat gun for spot-heating and adjustments.
Material
Thickness
1/8" (3.2 mm)
1/16" (1.6 mm)
3/32” (2.4 mm)
Approximate
Heating Time
1 min
35 sec
30 - 45 sec
Water Temperature:
Fahrenheit | Celsius
160° to 170° | 70° to 75°
150° to 160° | 65° to 70°
150° to 160° | 65° to 70°
Working
Time
4 to 6 min
1 min
2 to 3 min
Note: Overheating splinting materials increases the draping/stretching characteristics; allow material to cool slightly before handling to avoid excess stretching.
Indications
Splinting materials are intended to be used for fabrication of custom-molded rigid splints, orthoses, and adaptive equipment.
Best uses include:
- Knee splints
- Shoulder splints
- Hand splints
- Wrist splints
- Elbow splints
- Dynamic splints
- Pediatric splints
- Foot drop splints
- Splints for spasticity
- Carpal tunnel splints
- Back supports
- Burn splints
- Static progressive and serial static splints
Care & Cleaning
Store at temperatures between 40° and 90°F (4° and 32°C) and less than 65 percent relative humidity. Avoid prolonged exposure to light, especially ultraviolet. Avoid exposure to corrosive and ethylene oxide fumes.
Formed splints will lose their shape in temperatures over 135°F(57°C) and should be kept away from sources of heat such as ovens, hot water, and car windows.
Clean splint with soap and lukewarm water. Allow splint and straps to dry thoroughly before reapplication.
Precautions for finished orthoses
Splint adjustments are to be made only by a health care professional, who is responsible for providing wearing instructions and precautions to other practitioners, care providers and the patient. If unusual swelling, skin discoloration or discomfort occurs, discontinue use and consult a health care professional.
